External_Casing_Packer

[Columns] [Composed Of] [Referenced By] [Refers To]

Name	External_Casing_Packer
Entity Type	Table
Description	A device used on the outside of the well casing to seal off formations or protect certain zones.
Submodel	Tubular
Entity Scope	Project
Primary Key	Id
Natural Key
Generalizations	Tubular , Tracked_Facility , Facility , Entity , IT_Object , Tracked_Object
Specializations

Columns

[Previous] [Next] [Top]

Name	Value Domain	Property / Storage Unit	Description	Required / Default	Type
AV_Acting_Pressure	double	Pressure kPa	Acting Pressure for annular valve	No	NUMBER
AV_Setting_Pressure	double	Pressure kPa	Setting pressure for annular valve	No	NUMBER
Absolute_Roughness	double	Length m	The absolute roughness of the inside wall of the tubular	No	NUMBER
Address_Id	Address		The address of the Tracked Facility	No	NUMBER(38)
Axial_Stiffness	double	Spring_Stiffness N/m	A measure of the inflexibility of a tubular in an axial plane	No	NUMBER
Bend_Stiffness	double	Spring_Stiffness N/m	A measure of the inflexibility of a tubular in a longitudinal plane	No	NUMBER
Burst_Pressure	double	Pressure kPa	Burst Pressure of the tubular	No	NUMBER
Catalog_Cost	double	No_Unit	The catalog cost of the piece of equipment or facility expressed in the currency denoted by the attribute Catalog_Currency	No	NUMBER
Catalog_Currency	R_Currency		The currency in which the catalog cost is expressed.	No	VARCHAR2(64)
Catalog_Number	STRING64	NA	A catalog or part number for a facility.	No	VARCHAR2(64)
Coating_Desc	STRING64	NA	A description of the coating applied to the tubular	No	VARCHAR2(64)
Collapse_Pressure	double	Pressure kPa	Collapse pressure	No	NUMBER
Compressive_Strength	double	Pressure kPa	Compressive Strength of tubular	No	NUMBER
Displacement_Volume	double	Volume_Per_Length m3/m	The cross-sectional area of steel (or other material if the tubular is not made of steel) in the tubular expressed in units of volume per unit length.	No	NUMBER
Drift_Diameter	double	Cylinder_Diameter mm	Largest diameter of a perfect cylinder that can fit into the pipe. Because a pipe is slightly oval the drift diameter is always smaller than the quoted inner diameter. The drift diameter is used to know if a given pipe will run into a pipe.	No	NUMBER
ECP_Load	double	High_Force 1000 kgf	ECP load	No	NUMBER
Equivalent_Hole_Size	double	Cylinder_Diameter mm	Equivalent hole size	No	NUMBER
Existence_Kind	REF_EXISTENCE_KIND	NA	A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual.	Yes Actual	VARCHAR2(64)
Facility_Equipment_Flag	CODE	NA	A flag to denote whether a given facility should be treated as a facility (F), a piece of equipment (E) or both (B). A facility labeled as F represents a role (e.g. ESP) played by physical piece(s) of equipment and would not have attributes like serial number, manufacturer etc. It can be related to the physical pieces(s) of equipment using Facility_Composition. The individual physical pieces can be replaced if they need to be, without changing the facility. A Facility labeled as E represents a physical piece of equipment (e.g. Drill Pipe) which is normally used in the context of an activity and would not be permanently installed. A facility labeled as B represents both a physical piece of equipment as well as the role played by it. If this kind of Facility is connected in the network and stops working and needs to be replaced, then all connections to this Facility are expired and new connections are made to the replacement facility.	No	VARCHAR2(64)
Fatigue_Endurance_Limit	double	Stress kPa	The maximum stress below which the tubular could presumably endure an infinite number of cycles.	No	NUMBER
Fishneck_Inside_Diameter	double	Cylinder_Diameter mm	The inside diameter of the fishneck.	No	NUMBER
Fishneck_Length	double	Length m	Fishing neck length. This is defined as being the distance from the seal face to the location of any section change.	No	NUMBER
Fishneck_Outside_Diameter	double	Cylinder_Diameter mm	The inside diameter of the fishneck.	No	NUMBER
GUID	STRING128	NA	Globally Unique IDentifier for an instance of a class. USAGE NOTES: There are two cases: 1) GUID is not populated or used; and 2) it is populated with a value that is globally unique. If the GUID is populated there are two means of doing so for a given project: 2a) Seabed automatically generates and populates the GUID when an instance is created (valid only on Oracle based systems); and 2b) the GUID is generated and populated by an application (other than Seabed) on instance creation. Whether Seabed automatically generates GUIDs for a project is determined by the Auto_GUID flag in SDS_Account. Note that techniques 2a and 2b can coexist in the same project. When GUIDs are automatically generated an application can override the automatically generated GUID with its own GUID by simply supplying the GUID value. Applications that generate their own GUIDs and populate the GUID column will function correctly on projects which have automatic GUID generation turned on.	No	VARCHAR2(128)
Heavyweight_Flag	boolean	NA	A flag to denote whether or not the tubular is classified as a "Heavyweight" tubular or not	No	NUMBER(1)
Hydraulic_Diameter	double	Cylinder_Diameter mm	The equivalent hydraulic diameter of the tubular.	No	NUMBER
Hydrostatic_Test_Pressure	double	Pressure kPa	The nominal test pressure that a tubular can safely hold	No	NUMBER
ICV_Activation_Pressure	double	Pressure kPa	ICV activation pressure	No	NUMBER
ICV_Setting_Pressure	double	Pressure kPa	Setting pressure of internal control valve	No	NUMBER
Id	ID	No_Unit	Unique identifier for this entity.	Yes	NUMBER(38)
Inflation_Fluid_Density	double	Density g/cm3	Density of fluid for inflation of an external casing packer	No	NUMBER
Inflation_Fluid_Type	STRING64	NA	Type of fluid for inflation of an external casing packer	No	VARCHAR2(64)
Inflation_Method	STRING64	NA	Inflation method for external casing packer	No	VARCHAR2(64)
Inflation_Volume	double	Volume m3	Inflation volume	No	NUMBER
Insert_Date	DATE	NA	Date the entity was created in the repository	No	DATE
Insert_User	STRING64	NA	The name of the user responsible for the creation of this entity in the repository.	No	VARCHAR2(64)
Inside_Diameter	double	Cylinder_Diameter mm	Actual Inside diameter of an entity, such as an item of drill string equipment. In the absence of the actual value the catalog value should be used	No	NUMBER
Inventory_Id	STRING64	NA	The formal identification for a piece of equipment, a serial number or inventory ID	No	VARCHAR2(64)
Joint_Count	int	No_Unit	The number of joints of tubular goods.	No	NUMBER(10)
Knock_Off_Rod_Flag	boolean	NA	A flag to indicate whether or not a Knock off rod was provided	No	NUMBER(1)
Length	double	Length m	Actual length of the drill string component	No	NUMBER
Linear_Weight	double	Mass_Per_Length kg/m	Weight of an equipment item per unit length; e.g. Casing weight, pipe weight, cable weight, etc.	No	NUMBER
Manufacture_Date	DATE	NA	Date of manufacturing the facility.	No	DATE
Manufacturer	STRING64	NA	Name of the business associate who manufactured the item.	No	VARCHAR2(64)
Material_Type	STRING64	NA	The primary material type of facility.	No	VARCHAR2(64)
Max_Dog_Leg_Severity	double	Well_Curvature deg/30m	The maximum dog leg severity for the tubular.	No	NUMBER
Max_Make_Up_Torque	double	High_Torque kN.m	The torque above which you have over-torqued (damaged the threads).	No	NUMBER
Max_Outside_Diameter	double	Cylinder_Diameter mm	Maximum external diameter of the tubular. The Outside diameter is the external diameter of the body of the tubular	No	NUMBER
Min_Make_Up_Torque	double	High_Torque kN.m	The minimum torque required to make up the joint to meet the leak resistance spec.	No	NUMBER
Model_Name	STRING64	NA	Name of a model or version of some entity; for equipment, it may coincide with the trade name.	No	VARCHAR2(64)
Name	ENTITY_NAME	NA	The name given to any object or data item, e.g. name of Well, name of Field, etc.	No	VARCHAR2(255)
Non_Magnetic_Flag	boolean	NA	A flag indicating whether the equipment is made with non magnetic material	No	NUMBER(1)
Original_Source	STRING64	NA	The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15"	No	VARCHAR2(64)
Outside_Diameter	double	Cylinder_Diameter mm	Actual Outside diameter of the Equipment. For a tubular, it is the outside diameter of the body. In the absence of the actual value the catalog value should be used	No	NUMBER
Produced_By	STRING64	NA	The name of application role that created the entity, for data created programmatically.	No	VARCHAR2(64)
Release_Requirement	REMARKS_STR	NA	Requirements for releasing the external casing packer	No	VARCHAR2(999)
Remarks	STRING2000	NA	Any type of remarks added to an entity instance.	No	VARCHAR2(2000)
SDAT_Label	int	No_Unit	Label used by the security system for entitlements. SDAT is Secure Data Access Technology.	No	NUMBER(10)
Seal_Load	double	High_Force 1000 kgf	Seal Load	No	NUMBER
Selective_Inflation_Flag	boolean	NA	Selective inflation flag for external casing packer	No	NUMBER(1)
Serial_Number	STRING64	NA	The serial number placed on a piece of equipment.	No	VARCHAR2(64)
Setting_Requirement	REMARKS_STR	NA	Requirements for setting an external casing packer	No	VARCHAR2(999)
Size_Description	STRING64	NA	A textual description of the size of the piece of equipment. For example 8 1/2 inch.	No	VARCHAR2(64)
Source	STRING64	NA	Name of the person or organization responsible for this entitys E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User.	No	VARCHAR2(64)
Steel_Grade	STRING64	NA	Grade used to qualify the characteristics of the steel. For tubular, grade determines the minimum yield strength and thus the burst and collapse pressures. The grade can be either defined by the supplier or defined by the API.	No	VARCHAR2(64)
Tensile_Strength	double	Pressure kPa	Maximum tensile strength of the item	No	NUMBER
Thread_Lock_Flag	boolean	NA	A flag to indicate whether or not thread locks have been used	No	NUMBER(1)
Torsional_Stiffness	double	Spring_Stiffness N/m	A measure of the inflexibility of a tubular around its longitudinal axis	No	NUMBER
Torsional_Strength	double	Torque N.m	Maximum torsional strength of the item	No	NUMBER
Update_Date	DATE	NA	Date of the most-recent modification to the entity.	No	DATE
Update_User	STRING64	NA	The name of the user responsible for the last modification to this entity.	No	VARCHAR2(64)
Used_Class	STRING64	NA	Used Classification (New, used or reconditioned)	No	VARCHAR2(64)
VME_Rating	double	No_Unit	Von Mises Equivalent Stress Rating	No	NUMBER
Vendor_Id	Company		The company from which the facility was purchased.	No	NUMBER(38)
Version	STRING255	NA	The form or variant of the entity.	Yes 1	VARCHAR2(255)
Wall_Thickness	double	Cylinder_Diameter mm	The actual thickness of the wall of the tubular. In the absence of the actual value the catalog value should be used	No	NUMBER
Weight	double	Force N	The weight of the Tubular	No	NUMBER

Refers To

[Previous] [Next] [Top]

Link	To Entity	Description	Implementation Technique	Required
Vendor	Company	_	Nullify	No
Catalog_Currency	R_Currency	_	Restrict	No
Address	Address	_	Nullify	No

[Seabed Objects] [Entities in Schema Seabed] [Index]

External_Casing_Packer

Copyright © 2018 Schlumberger. All rights reserved.