Reamer

[Columns] [Composed Of] [Referenced By] [Refers To]

General Information

[Next]
Name Reamer
Entity Type Table
Description A tool used in drilling to smooth the wall of a well, enlarge the hole to the specified size, help stabilize the bit, straighten the wellbore if kinks or doglegs are encountered, and drill directionally. (MMS
Submodel Tubular
Entity Scope Project
Primary Key Id
Natural Key
Generalizations Rotary_Cutting_Tool , Tracked_Facility , Facility , Entity , IT_Object , Tracked_Object
Specializations


Columns

[Previous] [Next] [Top]
NameValue DomainProperty /
Storage Unit		DescriptionRequired /
Default		Type
Address_Id Address
The address of the Tracked Facility No
 NUMBER(38)
Blade_Count int No_Unit
 A count of the number of blades on the reamer No
 NUMBER(10)
Blade_Length double Length
m		 Length of blade measured along spiral; used for reamer blades. No
 NUMBER
Catalog_Cost double No_Unit
 The catalog cost of the piece of equipment or facility expressed in the currency denoted by the attribute Catalog_Currency No
 NUMBER
Catalog_Currency R_Currency
The currency in which the catalog cost is expressed. No
 VARCHAR2(64)
Catalog_Number STRING64 NA
 A catalog or part number for a facility. No
 VARCHAR2(64)
Coating_Desc STRING64 NA
 A description of the coating applied to the tubular No
 VARCHAR2(64)
Drill_Hole_Diameter double Cylinder_Diameter
mm		 Diameter of the hole size which this cutting tool will drill. It is the diameter of the bit's largest dimension. No
 NUMBER
Existence_Kind REF_EXISTENCE_KIND NA
 A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual. Yes
Actual		 VARCHAR2(64)
Facility_Equipment_Flag CODE NA
 A flag to denote whether a given facility should be treated as a facility (F), a piece of equipment (E) or both (B). A facility labeled as F represents a role (e.g. ESP) played by physical piece(s) of equipment and would not have attributes like serial number, manufacturer etc. It can be related to the physical pieces(s) of equipment using Facility_Composition. The individual physical pieces can be replaced if they need to be, without changing the facility. A Facility labeled as E represents a physical piece of equipment (e.g. Drill Pipe) which is normally used in the context of an activity and would not be permanently installed. A facility labeled as B represents both a physical piece of equipment as well as the role played by it. If this kind of Facility is connected in the network and stops working and needs to be replaced, then all connections to this Facility are expired and new connections are made to the replacement facility. No
 VARCHAR2(64)
Fishneck_Inside_Diameter double Cylinder_Diameter
mm		 The inside diameter of the fishneck. No
 NUMBER
Fishneck_Length double Length
m		 Fishing neck length. This is defined as being the distance from the seal face to the location of any section change. No
 NUMBER
GUID STRING128 NA
 Globally Unique IDentifier for an instance of a class. USAGE NOTES: There are two cases: 1) GUID is not populated or used; and 2) it is populated with a value that is globally unique. If the GUID is populated there are two means of doing so for a given project: 2a) Seabed automatically generates and populates the GUID when an instance is created (valid only on Oracle based systems); and 2b) the GUID is generated and populated by an application (other than Seabed) on instance creation. Whether Seabed automatically generates GUIDs for a project is determined by the Auto_GUID flag in SDS_Account. Note that techniques 2a and 2b can coexist in the same project. When GUIDs are automatically generated an application can override the automatically generated GUID with its own GUID by simply supplying the GUID value. Applications that generate their own GUIDs and populate the GUID column will function correctly on projects which have automatic GUID generation turned on. No
 VARCHAR2(128)
IADC_Code STRING64 NA
 International Association of Drilling Contractor Code No
 VARCHAR2(64)
Id ID No_Unit
 Unique identifier for this entity. Yes
 NUMBER(38)
Insert_Date DATE NA
 Date the entity was created in the repository No
 DATE
Insert_User STRING64 NA
 The name of the user responsible for the creation of this entity in the repository. No
 VARCHAR2(64)
Inventory_Id STRING64 NA
 The formal identification for a piece of equipment, a serial number or inventory ID No
 VARCHAR2(64)
Linear_Weight double Mass_Per_Length
kg/m		 Weight of an equipment item per unit length; e.g. Casing weight, pipe weight, cable weight, etc. No
 NUMBER
Manufacture_Date DATE NA
 Date of manufacturing the facility. No
 DATE
Manufacturer STRING64 NA
 Name of the business associate who manufactured the item. No
 VARCHAR2(64)
Material_Type STRING64 NA
 The primary material type of facility. No
 VARCHAR2(64)
Max_Make_Up_Torque double High_Torque
kN.m		 The torque above which you have over-torqued (damaged the threads). No
 NUMBER
Max_Outside_Diameter double Cylinder_Diameter
mm		 Maximum external diameter of the tubular. The Outside diameter is the external diameter of the body of the tubular No
 NUMBER
Min_Make_Up_Torque double High_Torque
kN.m		 The minimum torque required to make up the joint to meet the leak resistance spec. No
 NUMBER
Model_Name STRING64 NA
 Name of a model or version of some entity; for equipment, it may coincide with the trade name. No
 VARCHAR2(64)
Name ENTITY_NAME NA
 The name given to any object or data item, e.g. name of Well, name of Field, etc. No
 VARCHAR2(255)
Original_Source STRING64 NA
 The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15" No
 VARCHAR2(64)
Outside_Diameter double Cylinder_Diameter
mm		 Outside diameter of the cutting tool No
 NUMBER
Overall_Length double Length
m		 Overall Length of Rotary Cutting Tool (Drill Bit, Core Bit, Hole Opener, Reamer, etc) No
 NUMBER
Pass_Through_Diameter double Cylinder_Diameter
mm		 It is the minimum internal diameter of another tubular through which this tool can freely pass through. No
 NUMBER
Pilot_Bit_Diameter double Cylinder_Diameter
mm		 The diameter of the pilot hole drilled by the cutting tool. No
 NUMBER
Produced_By STRING64 NA
 The name of application role that created the entity, for data created programmatically. No
 VARCHAR2(64)
Reamer_Type R_Reamer
The type of reamer Yes
 VARCHAR2(64)
Remarks STRING2000 NA
 Any type of remarks added to an entity instance. No
 VARCHAR2(2000)
SDAT_Label int No_Unit
 Label used by the security system for entitlements. SDAT is Secure Data Access Technology. No
 NUMBER(10)
Serial_Number STRING64 NA
 The serial number placed on a piece of equipment. No
 VARCHAR2(64)
Shank_Inside_Diameter double Cylinder_Diameter
mm		 Inside diameter of bit body between the threaded connection and the base of the bit leg for roller cone and bit crown for fixed cutter bits No
 NUMBER
Shank_Length double Length
m		 Distance from the face of the bit connection to the base of the bit leg for roller cone and bit crown for fixed cutter bits No
 NUMBER
Shank_Outside_Diameter double Cylinder_Diameter
mm		 Outside diameter of bit body between the threaded connection and the base of the bit leg for roller cone and bit crown for fixed cutter bits No
 NUMBER
Size_Description STRING64 NA
 A textual description of the size of the piece of equipment. For example 8 1/2 inch. No
 VARCHAR2(64)
Source STRING64 NA
 Name of the person or organization responsible for this entitys E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User. No
 VARCHAR2(64)
Symmetric_Flag boolean NA
 A flag to denote whether the rotary cutting tool is symmetric along the center line of the tool. A value of 1 denotes it is symmetric, a value of 0 denotes it is not. No
1		 NUMBER(1)
Tensile_Strength double Pressure
kPa		 Maximum tensile strength of the item No
 NUMBER
Update_Date DATE NA
 Date of the most-recent modification to the entity. No
 DATE
Update_User STRING64 NA
 The name of the user responsible for the last modification to this entity. No
 VARCHAR2(64)
Used_Class STRING64 NA
 Used Classification (New, used or reconditioned) No
 VARCHAR2(64)
Vendor_Id Company
The company from which the facility was purchased. No
 NUMBER(38)
Version STRING255 NA
 The form or variant of the entity. Yes
1		 VARCHAR2(255)
Weight double Force
N		 The weight of the Rotary Cutting Tool. No
 NUMBER


Refers To

[Previous] [Next] [Top]
LinkTo EntityDescriptionImplementation TechniqueRequired
Reamer_Type R_Reamer The type of reamer Restrict Yes
Catalog_Currency R_Currency _ Restrict No
Address Address _ Nullify No
Vendor Company _ Nullify No


[Seabed Objects] [Entities in Schema Seabed] [Index]

Copyright © 2018 Schlumberger. All rights reserved.