Tubing

[Columns] [Composed Of] [Referenced By] [Refers To]

General Information

[Next]
Name Tubing
Entity Type Table
Description Class defining the nominal properties of a tubing pipe.
Submodel Tubular
Entity Scope Project
Primary Key Id
Natural Key
Generalizations Tubular , Tracked_Facility , Facility , Entity , IT_Object , Tracked_Object
Specializations


Columns

[Previous] [Next] [Top]
NameValue DomainProperty /
Storage Unit		DescriptionRequired /
Default		Type
Absolute_Roughness double Length
m		 The absolute roughness of the inside wall of the tubular No
 NUMBER
Address_Id Address
The address of the Tracked Facility No
 NUMBER(38)
Axial_Stiffness double Spring_Stiffness
N/m		 A measure of the inflexibility of a tubular in an axial plane No
 NUMBER
Bend_Stiffness double Spring_Stiffness
N/m		 A measure of the inflexibility of a tubular in a longitudinal plane No
 NUMBER
Burst_Pressure double Pressure
kPa		 Burst Pressure of the tubular No
 NUMBER
Catalog_Cost double No_Unit
 The catalog cost of the piece of equipment or facility expressed in the currency denoted by the attribute Catalog_Currency No
 NUMBER
Catalog_Currency R_Currency
The currency in which the catalog cost is expressed. No
 VARCHAR2(64)
Catalog_Number STRING64 NA
 A catalog or part number for a facility. No
 VARCHAR2(64)
Coating_Desc STRING64 NA
 A description of the coating applied to the tubular No
 VARCHAR2(64)
Collapse_Pressure double Pressure
kPa		 Collapse pressure No
 NUMBER
Compressive_Strength double Pressure
kPa		 Compressive Strength of tubular No
 NUMBER
Displacement_Volume double Volume_Per_Length
m3/m		 The cross-sectional area of steel (or other material if the tubular is not made of steel) in the tubular expressed in units of volume per unit length. No
 NUMBER
Drift_Diameter double Cylinder_Diameter
mm		 Largest diameter of a perfect cylinder that can fit into the pipe. Because a pipe is slightly oval the drift diameter is always smaller than the quoted inner diameter. The drift diameter is used to know if a given pipe will run into a pipe. No
 NUMBER
Existence_Kind REF_EXISTENCE_KIND NA
 A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual. Yes
Actual		 VARCHAR2(64)
Facility_Equipment_Flag CODE NA
 A flag to denote whether a given facility should be treated as a facility (F), a piece of equipment (E) or both (B). A facility labeled as F represents a role (e.g. ESP) played by physical piece(s) of equipment and would not have attributes like serial number, manufacturer etc. It can be related to the physical pieces(s) of equipment using Facility_Composition. The individual physical pieces can be replaced if they need to be, without changing the facility. A Facility labeled as E represents a physical piece of equipment (e.g. Drill Pipe) which is normally used in the context of an activity and would not be permanently installed. A facility labeled as B represents both a physical piece of equipment as well as the role played by it. If this kind of Facility is connected in the network and stops working and needs to be replaced, then all connections to this Facility are expired and new connections are made to the replacement facility. No
 VARCHAR2(64)
Fatigue_Endurance_Limit double Stress
kPa		 The maximum stress below which the tubular could presumably endure an infinite number of cycles. No
 NUMBER
Fishneck_Inside_Diameter double Cylinder_Diameter
mm		 The inside diameter of the fishneck. No
 NUMBER
Fishneck_Length double Length
m		 Fishing neck length. This is defined as being the distance from the seal face to the location of any section change. No
 NUMBER
Fishneck_Outside_Diameter double Cylinder_Diameter
mm		 The inside diameter of the fishneck. No
 NUMBER
GUID STRING128 NA
 Globally Unique IDentifier for an instance of a class. USAGE NOTES: There are two cases: 1) GUID is not populated or used; and 2) it is populated with a value that is globally unique. If the GUID is populated there are two means of doing so for a given project: 2a) Seabed automatically generates and populates the GUID when an instance is created (valid only on Oracle based systems); and 2b) the GUID is generated and populated by an application (other than Seabed) on instance creation. Whether Seabed automatically generates GUIDs for a project is determined by the Auto_GUID flag in SDS_Account. Note that techniques 2a and 2b can coexist in the same project. When GUIDs are automatically generated an application can override the automatically generated GUID with its own GUID by simply supplying the GUID value. Applications that generate their own GUIDs and populate the GUID column will function correctly on projects which have automatic GUID generation turned on. No
 VARCHAR2(128)
Heavyweight_Flag boolean NA
 A flag to denote whether or not the tubular is classified as a "Heavyweight" tubular or not No
 NUMBER(1)
Hydraulic_Diameter double Cylinder_Diameter
mm		 The equivalent hydraulic diameter of the tubular. No
 NUMBER
Hydrostatic_Test_Pressure double Pressure
kPa		 The nominal test pressure that a tubular can safely hold No
 NUMBER
Id ID No_Unit
 Unique identifier for this entity. Yes
 NUMBER(38)
Insert_Date DATE NA
 Date the entity was created in the repository No
 DATE
Insert_User STRING64 NA
 The name of the user responsible for the creation of this entity in the repository. No
 VARCHAR2(64)
Inside_Diameter double Cylinder_Diameter
mm		 Actual Inside diameter of an entity, such as an item of drill string equipment. In the absence of the actual value the catalog value should be used No
 NUMBER
Inventory_Id STRING64 NA
 The formal identification for a piece of equipment, a serial number or inventory ID No
 VARCHAR2(64)
Joint_Count int No_Unit
 The number of joints of tubular goods. No
 NUMBER(10)
Length double Length
m		 Actual length of the drill string component No
 NUMBER
Linear_Weight double Mass_Per_Length
kg/m		 Weight of an equipment item per unit length; e.g. Casing weight, pipe weight, cable weight, etc. No
 NUMBER
Manufacture_Date DATE NA
 Date of manufacturing the facility. No
 DATE
Manufacturer STRING64 NA
 Name of the business associate who manufactured the item. No
 VARCHAR2(64)
Material_Type STRING64 NA
 The primary material type of facility. No
 VARCHAR2(64)
Max_Dog_Leg_Severity double Well_Curvature
deg/30m		 The maximum dog leg severity for the tubular. No
 NUMBER
Max_Make_Up_Torque double High_Torque
kN.m		 The torque above which you have over-torqued (damaged the threads). No
 NUMBER
Max_Outside_Diameter double Cylinder_Diameter
mm		 Maximum external diameter of the tubular. The Outside diameter is the external diameter of the body of the tubular No
 NUMBER
Min_Make_Up_Torque double High_Torque
kN.m		 The minimum torque required to make up the joint to meet the leak resistance spec. No
 NUMBER
Model_Name STRING64 NA
 Name of a model or version of some entity; for equipment, it may coincide with the trade name. No
 VARCHAR2(64)
Name ENTITY_NAME NA
 The name given to any object or data item, e.g. name of Well, name of Field, etc. No
 VARCHAR2(255)
Non_Magnetic_Flag boolean NA
 A flag indicating whether the equipment is made with non magnetic material No
 NUMBER(1)
Original_Source STRING64 NA
 The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15" No
 VARCHAR2(64)
Outside_Diameter double Cylinder_Diameter
mm		 Actual Outside diameter of the Equipment. For a tubular, it is the outside diameter of the body. In the absence of the actual value the catalog value should be used No
 NUMBER
Produced_By STRING64 NA
 The name of application role that created the entity, for data created programmatically. No
 VARCHAR2(64)
Remarks STRING2000 NA
 Any type of remarks added to an entity instance. No
 VARCHAR2(2000)
SDAT_Label int No_Unit
 Label used by the security system for entitlements. SDAT is Secure Data Access Technology. No
 NUMBER(10)
Serial_Number STRING64 NA
 The serial number placed on a piece of equipment. No
 VARCHAR2(64)
Size_Description STRING64 NA
 A textual description of the size of the piece of equipment. For example 8 1/2 inch. No
 VARCHAR2(64)
Source STRING64 NA
 Name of the person or organization responsible for this entitys E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User. No
 VARCHAR2(64)
Steel_Grade STRING64 NA
 Grade used to qualify the characteristics of the steel. For tubular, grade determines the minimum yield strength and thus the burst and collapse pressures. The grade can be either defined by the supplier or defined by the API. No
 VARCHAR2(64)
Tensile_Strength double Pressure
kPa		 Maximum tensile strength of the item No
 NUMBER
Thread_Lock_Flag boolean NA
 A flag to indicate whether or not thread locks have been used No
 NUMBER(1)
Torsional_Stiffness double Spring_Stiffness
N/m		 A measure of the inflexibility of a tubular around its longitudinal axis No
 NUMBER
Torsional_Strength double Torque
N.m		 Maximum torsional strength of the item No
 NUMBER
Tubing_Spec R_Tubing_Cat
Reference to the R_Tubing defining the type of tubing pipe No
 NUMBER(38)
Update_Date DATE NA
 Date of the most-recent modification to the entity. No
 DATE
Update_User STRING64 NA
 The name of the user responsible for the last modification to this entity. No
 VARCHAR2(64)
Used_Class STRING64 NA
 Used Classification (New, used or reconditioned) No
 VARCHAR2(64)
VME_Rating double No_Unit
 Von Mises Equivalent Stress Rating No
 NUMBER
Vendor_Id Company
The company from which the facility was purchased. No
 NUMBER(38)
Version STRING255 NA
 The form or variant of the entity. Yes
1		 VARCHAR2(255)
Wall_Thickness double Cylinder_Diameter
mm		 The actual thickness of the wall of the tubular. In the absence of the actual value the catalog value should be used No
 NUMBER
Weight double Force
N		 The weight of the Tubular No
 NUMBER


Refers To

[Previous] [Next] [Top]
LinkTo EntityDescriptionImplementation TechniqueRequired
Tubing_Spec R_Tubing_Cat Reference to the R_Tubing defining the type of tubing pipe Restrict No
Catalog_Currency R_Currency _ Restrict No
Address Address _ Nullify No
Vendor Company _ Nullify No


[Seabed Objects] [Entities in Schema Seabed] [Index]

Copyright © 2018 Schlumberger. All rights reserved.