| Name | Measurement_Tag_Vect_Conf |
|---|---|
| Entity Type | Table |
| Description | The configuration of a type of vector measurement. Vector measurements are represented by an array of values. |
| Submodel | Facility |
| Entity Scope | Project |
| Primary Key | Id |
| Natural Key | |
| Generalizations | Measurement_Tag , Entity , IT_Object , Tracked_Object |
| Specializations |
| Name | Value Domain | Property / Storage Unit | Description | Required / Default | Type |
|---|---|---|---|---|---|
| Acquisition_Device_Id | Acquisition_Device |
|
The control device for the measurement tag where the value of the measurement tag is recorded or set. | No |
NUMBER(38) |
| Acquisition_Frequency | double | No_Unit |
Frequency of acquisition between the devices and the acquisition sub system | No |
NUMBER |
| Channel_Address | STRING64 | NA |
Address of the channel on the device. For example the modbus address | No |
VARCHAR2(64) |
| Config_Cat | R_Measurement_Vector_Cat |
|
The default catalog entry for this tag configuration | No |
NUMBER(38) |
| Depth_Scaling_Factor | double | No_Unit |
Depth Scaling Factor parameter of the fiber wire line log deviation in the well | No |
NUMBER |
| Distance | double | No_Unit |
Distance between each measurement | No |
NUMBER |
| End_Date | DATE | NA |
End of service | No |
DATE |
| Existence_Kind | REF_EXISTENCE_KIND | NA |
A reference value that describes the state of existence in the lifecycle of the entity, for example, Planned, Predicted, Required, Simulated, and Actual. | Yes Actual |
VARCHAR2(64) |
| Fiber_End_Number | R_Fiber_End |
|
The specific end of the fiber that was used to collect the vector measurement. Valid values are E1 or E2. | No |
VARCHAR2(64) |
| Fiber_Id | Fiber |
|
The identifier of the fiber that will be used to measure the vector measurement tags. | No |
NUMBER(38) |
| GUID | STRING128 | NA |
Globally Unique IDentifier for an instance of a class. USAGE NOTES: There are two cases: 1) GUID is not populated or used; and 2) it is populated with a value that is globally unique. If the GUID is populated there are two means of doing so for a given project: 2a) Seabed automatically generates and populates the GUID when an instance is created (valid only on Oracle based systems); and 2b) the GUID is generated and populated by an application (other than Seabed) on instance creation. Whether Seabed automatically generates GUIDs for a project is determined by the Auto_GUID flag in SDS_Account. Note that techniques 2a and 2b can coexist in the same project. When GUIDs are automatically generated an application can override the automatically generated GUID with its own GUID by simply supplying the GUID value. Applications that generate their own GUIDs and populate the GUID column will function correctly on projects which have automatic GUID generation turned on. | No |
VARCHAR2(128) |
| IO_Data_Type | R_Data_Type |
|
The data type of the input/output. For example, boolean, integer, float, etc. | No |
VARCHAR2(64) |
| Id | ID | No_Unit |
Unique identifier for this entity. | Yes |
NUMBER(38) |
| Insert_Date | DATE | NA |
Date the entity was created in the repository | No |
DATE |
| Insert_User | STRING64 | NA |
The name of the user responsible for the creation of this entity in the repository. | No |
VARCHAR2(64) |
| Measurement_Mode | R_Measurement_Mode |
|
The method that was used to measure the vector tag. For example, temperature measurement, post processing measurement, etc. | No |
VARCHAR2(64) |
| Measurement_Point_Id | Measurement_Point |
|
Location of the measurement tag | No |
NUMBER(38) |
| Measurement_Process_Code | R_Measurement_Process |
|
The process that was used to obtain the measurement. For example, raw measurement data from the average, raw measurement with background data subtracted, etc. | No |
VARCHAR2(64) |
| Measurement_Signal_Code | R_Measurement_Signal |
|
The measurement signal that was used to receive the measurement. For example Temperature sensitive measurement for multi and single mode fibers, or temperature insensitive measurement for multi-mode fiber only, etc. | No |
VARCHAR2(64) |
| Measurement_Tag_UOM | R_Unit |
|
The unit of measure in which the value for the measurement tag is stored. | No |
VARCHAR2(64) |
| Name | ENTITY_NAME | NA |
The name given to any object or data item, e.g. name of Well, name of Field, etc. | No |
VARCHAR2(255) |
| Original_Source | STRING64 | NA |
The name of the person, Organization or project source that originally provided this entity, e.g. "IHS-EnergyData" or "FinderUpper Stratton Deeper Pool 15" | No |
VARCHAR2(64) |
| Point_Count | int | No_Unit |
Nominal number of points in vector | No |
NUMBER(10) |
| Produced_By | STRING64 | NA |
The name of application role that created the entity, for data created programmatically. | No |
VARCHAR2(64) |
| Read_Write_Indicator | STRING4 | NA |
Read means measurement device, Write means control device. So a device is either a measurement or a control device. | No |
VARCHAR2(4) |
| Remarks | STRING2000 | NA |
Any type of remarks added to an entity instance. | No |
VARCHAR2(2000) |
| SDAT_Label | int | No_Unit |
Label used by the security system for entitlements. SDAT is Secure Data Access Technology. | No |
NUMBER(10) |
| Section_Number | R_Fiber_Section_Number |
|
The section of the fiber in which the measurement is acquired. The range is S1..S7. S0 for profiles that are not produced in a section. | No |
VARCHAR2(64) |
| Sensor_Id | Sensor |
|
The sensor which measured this tag. | No |
NUMBER(38) |
| Source | STRING64 | NA |
Name of the person or organization responsible for this entitys E and P content and quality. Not the data technologist or IT expert creating the entity, for which see IT_Object.Insert_User and Update_User. | No |
VARCHAR2(64) |
| Start_Date | DATE | NA |
Start of service | No |
DATE |
| Start_Depth | double | Depth m |
First acquisition value depth | No |
NUMBER |
| Update_Date | DATE | NA |
Date of the most-recent modification to the entity. | No |
DATE |
| Update_User | STRING64 | NA |
The name of the user responsible for the last modification to this entity. | No |
VARCHAR2(64) |
| Version | STRING255 | NA |
The form or variant of the entity. | Yes 1 |
VARCHAR2(255) |
| Link | To Entity | Description | Implementation Technique | Required |
|---|---|---|---|---|
| Measurement_Process_Code | R_Measurement_Process | The process that was used to obtain the measurement. For example, raw measurement data from the average, raw measurement with background data subtracted, etc. | Restrict | No |
| Config_Cat | R_Measurement_Vector_Cat | The default catalog entry for this tag configuration | Restrict | No |
| Fiber | Fiber | The identifier of the fiber that will be used to measure the vector measurement tags. | Restrict | No |
| Section_Number | R_Fiber_Section_Number | The section of the fiber in which the measurement is acquired. The range is S1..S7. S0 for profiles that are not produced in a section. | Restrict | No |
| Measurement_Signal_Code | R_Measurement_Signal | The measurement signal that was used to receive the measurement. For example Temperature sensitive measurement for multi and single mode fibers, or temperature insensitive measurement for multi-mode fiber only, etc. | Restrict | No |
| Sensor | Sensor | _ | Nullify | No |
| Fiber_End_Number | R_Fiber_End | The specific end of the fiber that was used to collect the vector measurement. Valid values are E1 or E2. | Restrict | No |
| Measurement_Tag_UOM | R_Unit | _ | Restrict | No |
| Measurement_Point | Measurement_Point | _ | Restrict | No |
| IO_Data_Type | R_Data_Type | _ | Restrict | No |
| Acquisition_Device | Acquisition_Device | _ | Cascade | No |
| Measurement_Mode | R_Measurement_Mode | The method that was used to measure the vector tag. For example, temperature measurement, post processing measurement, etc. | Restrict | No |